Project Description

1030nm/1064nm 1×4, 1x 8 PM Fiber Splitter Modules (1xN)

1064nm Polarization maintaining splitter /coupler modules combine multiple incoming optical fiber inputs into one output, while maintaining the polarization state of the light. It can also be used as a PM splitter.

Our PM coupler modules are assembled using thin-film filter-based 1×2 and 2×2 PM optical fiber couplers, with center wavelengths at 1310nm or 1550nm or 1064nm, and bandwidth of +/-30nm.The Polarization Maintaining Coupler is available in a wide range of coupling ratio. PM couplers are widely used in fiber optic communication systems, Raman Amplifiers and other fiber instrument applications.

DK Photonics offers a large selection of PM Fiber Coupler Module. These devices can handle powers rang from 300mW to 2W or other on request, available in 1xN and 2xN (N<10) types, and have center operating wavelengths ranging from 980 nm to 1650nm.

If you do not see a standard PM Fiber Coupler Module that meets your needs, we welcome the opportunity to review your desired specification and quote a custom PM Fiber Coupler Module. Requests for custom fiber pigtails, differebt, coupling ratio different wavelengths and handling power of operation or other specific needs will be readily addressed.

Features Applications
·       Low Insertion Loss

·       High Extinction Ratio

·       Compact

·       High Stability and Reliability

·       Fiber Optical Instrument

·       Fiber amplifier

·       Fiber Sensor

·       Power Monitoring

Performance Specifications

Parameter Unit 1X4 1X8
Center Wavelength nm 980, 1030,1064
Operating Wavelength Range nm ± 30
Typ. Insertion Loss dB 7.5 11.0
Insertion loss dB ≤8.0 ≤11.5
WDL dB ≤0.5
Uniformity dB ≤0.8 ≤1.0
Directivity dB ≥50 ≥45
Extinction ratio Type B dB ≥20 ≥18
Extinction ratio Type F dB ≥22 ≥20
Return loss (input/output) dB ≥50 ≥50
Fiber Type PM980
Operating temperature -5 ~ + 70
Storage temperature -40 ~ + 85
Max. Optical Power W 0.5, 2, 5, 10
Dimensions mm 115x100x12(Aluminum)
“B” for Both axis working, “F” for Fast axis blocking
  1. above specifications are for device without connector. All parameters are tested at room temperature.
  2. If tap port coupling ratio is ≤ 5%, ER will be 2dB lower; for ≤1% tap port, ER is out of concern.
  3. For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower. The default connector key is aligned to slow axis. Power transmits through the connector less than 2W.
  4. For >10W high power applications, we will use heat sink package, contact DK Photonics for details.
  5. If there is pulse application, please be sure to inform us of pulse energy and peak power.

 

Package Dimensions

 

Order information P/N: PMFSM-①-②-③-④-⑤-⑥-⑦-⑧

When you inquire, please provide the correct P/N number according to our ordering information, and attach the appropriate description would be better. If need any connector, we do not recommend choosing a 250μm bare fiber pigtail.

Type Wavelength Coupling Ratio Power Handling Axis Alignment Pigtails Diameter Fiber Length Connector
3:1×3

4:1×4

5:1×5

6:1×6

8:1×8

98:980nm

03:1030nm

64:1064nm

XX: Others

E: even

X: Other

L:<0.5W

1:1W

3:3W

5:5W

B: Both axis working

F: Fast axis blocking

25:250μm bare fiber

90:900μm Loose Tube

XX: Others

08:0.8m

10:1.0m

XX: Others

00: None

FP: FC/PC

FA: FC/APC

SA: SC/APC

LA: LC/APC

XX: Others

Part Number Example: PMFSM-4-64-E-B-1-90-10-FA

Description: 1064nm 1×4 PM Fiber Splitter Module, 25/25/25/25 coupling ratio, both axis working, PM980 Panda fiber with 0.9mm OD loose tube, 1.0m length and FC/APC connectors at all ports.

Ordering Information for Custom Parts

If you need to customize other specifications, please provide detailed description for your requirement.

Download

Request a quote

Please provide the following information so that we may process your quote quickly, Please let us know more about your inquiry. If you do not give us any information, we will think that you are not serious, and you might not get a reply from us.