Project Description

2μm Isolator Polarization Beam Splitter/Combiner Hybrid

The 2000nm Isolator Polarization Beam Combiner & Splitter is a hybrid device of isolator and Polarization Beam Combiner & Splitter integrated component , which combines two orthogonal polarization signals into one output fiber, and blocks the reflected light from the terminal, with a single compact package and low cost and lower insertion. PBC/PBS is widely applied in Fiber Optics Current Transducer(Foct), Gyro, Raman Amplifier, EDFA, for the extremely performance of low insertion loss, high extinction ratio, high environment stability and reliability.

If you do not see a standard Isolator Polarization Beam Combiner/Splitter that meets your needs, we welcome the opportunity to review your desired specification and quote a custom Polarization Beam Combiner/Splitter. Requests for custom fiber pigtails, different wavelengths and handling power of operation or other specific needs will be readily addressed.

Features Applications
·         Low Insertion Loss

·         Low Extinction Ratio

·         High Return Loss

·         High Isolation

·         High stability & Reliability

·         EDFA

·         Testing Instrumentations

·         Transmitters

·         Fiber Laser

·         WDM System

Performance Specifications

Parameter Unit Value
Stage Single Stage Dual Stage
Operating wavelength nm 2000
Operating bandwidth nm ±40 ±40
Typical insertion loss dB 0.70 0.90
Max. insertion loss dB 1.30 1.50
Min. Extinction Ratio (for splitter only) dB 20 18
Min. Isolation dB 20 38
Return loss dB >50
Directivity dB >50
Max. Power Handling(Total) W 0.5, 1, 2, 3, 5, 10
Tensile Load N < 5
Fiber Type Port 1&Port2 PM1550 Panda Fiber or PM1950 fiber(same to port 3)
Port 3  SMF-28e, or PM1550 Panda Fiber, or PM1950 fiber
Operating temperature -5 ~ +70
Storing temperature -40 ~ +85
Package dimension mm Ø5.5 x 35
  1. Above specifications are for device without connector.
  2. For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower. The default connector key is aligned to slow axis. Power transmit through the connector less than 2W.
  3. For >10W high power applications, we will use heat sink package, contact DK Photonics for details.

Package Dimension

*Due to ongoing design improvements, the package size is subject to change. Please contact DK Photonics for confirmation.

Order information   P/N: IPBC/IPBS-①-②-③-④-⑤-⑥-⑦

When you inquire, please provide the correct P/N number according to our ordering information, and attach the appropriate description would be better. If need any connector, we do not recommend choosing a 250μm bare fiber pigtail.

Stage Operating Wavelength Power Handling Fiber type (Port3) Pigtails Diameter Fiber Length Connector
S: Single Stage

D: Dual Stage

2000:2000nm

XXXX: Others

L:<0.5W

1:1W

2:2W

3:3W

5:5W

10:10W

S:SMF-28e fiber

215:PM1550 fiber, slow axis 45° to port 1

219:PM1950 fiber, slow axis 45° to port 1

315:PM1550 fiber, slow axis aligned to port 1

319:PM1950 fiber, slow axis aligned to port 1

25:250μm

90:900μm

XX: Others

08:0.8m

10:1.0m

XX: Others

00:None

FP: FC/PC

FA: FC/APC

SP: SC/PC

SA: SC/APC

LP: LC/PC

LA: LC/APC

XX: Others

Part Number Example: IPBC-S-2000-L-319-25-10-00

Description: 2000nm Isolator Polarization Beam Splitter Hybrid,0.5W power, P grade, PM1950 fiber at port 3, slow axis aligned to port 1, with bare fiber, 1.0m fiber length, and no connectors at all ports.

Ordering Information For Custom Parts

If you need to customize other specifications, please provide detailed description for your requirement.

Download

Request a quote

Please provide the following information so that we may process your quote quickly, Please let us know more about your inquiry. If you do not give us any information, we will think that you are not serious, and you might not get a reply from us.