Project Description
1310/1550nm 3 port Multimode Optical Circulator
The 1550nm 3 port Multimode Optical Circulator is a compact, high performance light-wave component that routes incoming signals from Port 1 to Port 2, and incoming Port 2 signals to Port 3.So fiber optic circulators act as signal routers, transmitting light from an input fiber to an output fiber, but directing light that returns along that output fiber to a third port. They perform a similar function as an isolator, protecting the input fiber from return power, but also allowing the rejected light to be employed.
If you do not see a standard Optical Circulator that meets your needs, we welcome the opportunity to review your desired specification and quote a custom circulator. Requests for custom fiber pigtails, different wavelengths and handling power of operation or other specific needs will be readily addressed.
| Features | Applications |
| · Low Insertion Loss
· High Isolation · High Stability and Reliability · Cost Effective |
· Optical Fiber Amplifier
· Pump Laser Source · Fiber Optic Sensor · Test and Measurement · Instrumentation |
Performance Specifications
| Parameter | Unit | Values |
| Configuration | – | Port 1 to Port 2 to Port 3 |
| Center Wavelength (λc) | nm | 1310,1550 |
| Operating Wavelength Range | nm | λ±30 |
| Min. Isolation, λc, 23℃(2->1,3->2) | dB | 20 |
| Typical Insertion Loss,23℃ | dB | 0.8 |
| Max. Insertion Loss,23℃ | dB | 1.2 |
| Min. Return Loss | dB | 30 |
| Min. Cross Talk (dB) | dB | 50 |
| Max. Polarization Mode Dispersion | ps | 0.1 |
| Max. Polarization Dependent Loss,23℃ | dB | 0.15 |
| Maximum Power Handling (total pass, continuous wave) | W | 0.3, 1, 3, 5 |
| Max. Tensile Load | N | 5 |
| Fiber Type | – | 50/125um or 62.5/125um MM fiber |
| Operating Temperature | °C | 0 ~+70 |
| Storage Temperature | °C | -40 ~+85 |
| Dimensions | mm | Ø5.5 x L50 |
- Above specification are for device without connector, and may change without notice.
- IL is 0.3 dB higher and RL is 5 dB lower for each connector added.
- The pass optical power is 2 W only for connector added.
- Tested parameters may be inconsistent with different multi-mode light sources used.
Package Dimension
Order information P/N: MMOC-①-②-③-④-⑤-⑥-⑦-⑧
When you inquire, please provide the correct P/N number according to our ordering information, and attach the appropriate description would be better. If need any connector, we do not recommend choosing a 250μm bare fiber pigtail.
| ① | ② | ③ | ④ | ⑤ | ⑥ | ⑦ |
| Port | Operating Wavelength | Power Handling | Fiber Type | Fiber Diameter | Fiber Length | Connector |
| 3:3port | 13:1310nm
15:1550nm |
L:<0.3W
1:1W 3:3W 5:5W |
50:50/125 fiber
62:62.5/125 fiber |
25:250μm bare fiber
90:900μm Loose Fiber XX: Others |
05:0.5m
10:1.0m 15:1.5m XX: Others |
00:None
FP: FC/PC FA: FC/APC SP: SC/PC LP: LC/PC XX: Others |
Part Number Example: MMOC-3-15-L-62-90-10-FA
Description: 3 ports 1550nm Multimode Optical Circulator, 300mW power handling, 62.5/125um MM fiber, with 0.9mm OD loose tube, 1.0m length fiber pigtails, FC/APC connectors at all ports.
Ordering Information for Custom Parts
If you need to customize other specifications, please provide detailed description for your requirement.
Download
Request a quote
Please provide the following information so that we may process your quote quickly, Please let us know more about your inquiry. If you do not give us any information, we will think that you are not serious, and you might not get a reply from us.
