Project Description
1030nm 3-port Polarization Maintaining Optical Circulator(Both axis working)
The 1030nm polarization maintaining optical circulator is a compact, high performance lightwave component that routes incoming signals from Port 1 to Port 2, and incoming Port 2 signals to Port 3.So fiber optic circulators act as signal routers, transmitting light from an input fiber to an output fiber, but directing light that returns along that output fiber to a third port. They perform a similar function as an isolator, protecting the input fiber from return power, but also allowing the rejected light to be employed.
DK Photonics offers a large selection of polarization insensitive or polarization maintaining 3-port/4-port optical circulator. These devices can handle powers rang from 300mW to 20W, and have center operating wavelengths ranging from 500nm to 2100nm.
If you do not see a standard Optical Circulator that meets your needs, we welcome the opportunity to review your desired specification and quote a custom circulator. Requests for custom fiber pigtails, different wavelengths and handling power of operation or other specific needs will be readily addressed.
| Features | Applications |
| · Compact size
· High Isolation · High Extinction Ratio · Low Cost · High Stability & Reliability |
· Fiber Amplifiers
· Fiber Sensor · Test and Measurement · Coherent Detecting |
Performance Specifications
| Parameter | Unit | Values |
| Axis | – | Both axis working |
| Center Wavelength | nm | 1030 |
| Operating Wavelength Range | nm | ± 5 |
| Min. Isolation at 23℃ | dB | 20 |
| Typ. Isolation at 23℃ | dB | 23 |
| Typ. Insertion Loss at 23℃ | dB | 3.5 |
| Max. Insertion Loss at 23℃ | dB | 3.8 |
| Min. Extinction Ratio at 23℃ | dB | 18 |
| Min. Return Loss | dB | 50 |
| Min. Cross Talk | dB | 50 |
| Max. Power Handling(total input, continuous wave) | mW | 100 |
| Max. Tensile Load | N | 5 |
| Fiber Type | – | PM980 Panda Fiber |
| Operating Temperature | ℃ | -5 to +70 |
| Storage Temperature | ℃ | -40 to +85 |
| Package Dimensions | mm | (L)34×(W)8.4×(H)8.4 |
- Above specifications are for device without connector.
- For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower. The default connector key is aligned to slow axis.
- For this 1030nm Circulator, due to high IL, it is recommended to use average power of <100mW, If you need higher handle power, lower IL, please look for our 1030nm High power Circulator.
- If there is pulse application, please be sure to inform us of pulse energy and peak power.
Package Dimension
*Due to ongoing design improvements, the package size is subject to change. Please contact DK Photonics for confirmation.
Order information P/N: PMOC-①-②-③-④-⑤-⑥
When you inquire, please provide the correct P/N number according to our ordering information, and attach the appropriate description would be better. If need any connector, we do not recommend choosing a 250μm bare fiber pigtail.
| ① | ② | ③ | ④ | ⑤ | ⑥ |
| Port | Operating Wavelength | Axis | Pigtails Diameter | Fiber Length | Connector |
| 3:3port | 03:1030nm | B: Both axis working | 25:250μm bare fiber
90:900μm Loose tube XX: Others |
05:0.5m
08:0.8m 10:1.0m XX:Others |
00:None
FP: FC/PC FA: FC/APC XX: Others |
Part Number Example: PMOC-3-03-F-25-10-00
Description: 1030nm 3-port Polarization Maintaining Optical Circulator, 100mW, both axis working, with PM980 bare fiber, 1.0m length fiber and no connector at all ports.
Ordering Information for Custom Parts
If you need to customize other specifications, please provide detailed description for your requirement.
Download
Request a quote
Please provide the following information so that we may process your quote quickly, Please let us know more about your inquiry. If you do not give us any information, we will think that you are not serious, and you might not get a reply from us.
