Project Description
1064nm ISO+Polarization Beam Combiner/Splitter
The 1064nm Isolator & Polarization Beam Combiner/Splitter can be used either as a polarization beam combiner to combine light beams from two PM input fibers into a single output fiber, or as a polarization beam splitter to split light from an input fiber into two output fibers of orthogonal polarization states.
DK Photonics offers a large selection of IPBS/C. These devices can handle powers rang from 300mW to 10W or other on request, and have center operating wavelengths ranging from 850 nm to 1650nm.
If you do not see a standard Polarization Beam Combiner/Splitter that meets your needs, we welcome the opportunity to review your desired specification and quote a custom Polarization Beam Combiner/Splitter. Requests for custom fiber pigtails, different wavelengths and handling power of operation or other specific needs will be readily addressed.
Features | Applications |
|
|
Performance Specifications
Parameter | Unit | Value | |
Stage | – | Single stage Isolation | |
Operating wavelength | nm | 1064 | |
Operating bandwidth | nm | ±5 | |
Typical insertion loss | dB | 1.8 | |
Max. insertion loss | dB | 2.1 | |
Typ. Peak Isolation at 23℃ | dB | 35 | |
Min. Isolation at 23℃ | dB | 28 | |
Min. Extinction Ratio | dB | 20 | |
Return loss | dB | >50 | |
Directivity | dB | >50 | |
Max. Power Handling | mW | 300 | |
Tensile Load | N | < 5 | |
Fiber Type | Port 1&Port2 | – | PM980 Panda Fiber |
Port 3 | – | HI1060, or PM980 Panda Fiber | |
Operating temperature | ℃ | -5 ~ +70 | |
Storing temperature | ℃ | -40 ~ +85 | |
Package dimension | mm | Ø5.5 x 35 or customer specified |
- above specifications are for device without connector. All parameters are tested at room temperature.
- For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower. The default connector key is aligned to slow axis. Power transmits through the connector less than 2W.
Package Dimension
*Due to ongoing design improvements, the package size is subject to change. Please contact DK Photonics for confirmation.
Order information P/N: IPBC/PBS-①-②-③-④-⑤-⑥-⑦
When you inquire, please provide the correct P/N number according to our ordering information, and attach the appropriate description would be better. If need any connector, we do not recommend choosing a 250μm bare fiber pigtail.
① | ② | ③ | ④ | ⑤ | ⑥ | ⑦ |
Stage | Operating Wavelength | Power Handling(Total) | Fiber type (Port3) | Pigtails Diameter | Fiber Length | Connector |
S:Single Stage | 64:1064nm
XX: Others |
L:<300mW | 1:HI1060 fiber
2:PM fiber, slow axis 45° to port 1 3:PM fiber, slow axis aligned to port 1 |
25:250μm
90:900μm XX: Others |
08:0.8m
10:1.0m XX: Others |
00:None
FP: FC/PC FA: FC/APC LA: LC/APC XX: Others |
Part Number Example: IPBS-S-64-L-1-25-10-00
Description: 1064nm Isolator & Polarization Beam Splitter, PM980 fiber at port 3, and slow axis aligned to port 1, with bare fiber, 1.0 fiber length, and no connectors at all ports.
Ordering Information for Custom Parts
If you need to customize other specifications, please provide detailed description for your requirement.
Download
Request a quote
Please provide the following information so that we may process your quote quickly, Please let us know more about your inquiry. If you do not give us any information, we will think that you are not serious, and you might not get a reply from us.