Project Description
1.0μm In-line Polarizer
The 1.0μm In-line Polarizer is designed to pass light with one specific polarization while blocking the other polarization. It can be used to convert no-polarized light into polarized light with high extinction ratio. It can also be used to enhance the extinction ratio of signals with its excellent polarization properties. It is ideal for high speed communication systems and test instrumentation where high polarization extinction ratio is required.
If you do not see a standard In-line Polarizer that meets your needs, we welcome the opportunity to review your desired specification and quote a custom In-line Polarizer. Requests for custom fiber pigtails, different wavelengths and handling power of operation or other specific needs will be readily addressed.
Features | Applications |
· Low Insertion Loss
· High Power Handling · High Extinction Ratio · Low Cost · High Reliability |
· Fiber Amplifiers
· Fiber lasers · Fiber Sensor · Test and Measurement · Communications System |
Performance Specifications
Parameter | Unit | Values | |
Operating Wavelength | nm | 980,1030,1064 | |
Bandwidth | nm | ±30 | |
Typ. Insertion Loss@23℃ | dB | 0.4 | |
Max. Insertion Loss@23℃ | dB | 0.6 | |
Typ. Extinction Ratio | dB | 30 | |
Min. Extinction Ratio | dB | 28 | |
Min. Return Loss | dB | 50 | |
Fiber Type In/Out | Option 1 | – | PM980 Fiber→PM980 Fiber |
Option 2 | – | HI1060 fiber→PM980 Fiber | |
Option 3 | – | HI1060→HI1060 | |
Max. Power Handling | W | 0.5, 1, 3, 5, 10 | |
Max. Tensile Load | N | 5 | |
Operating temperature | ℃ | -5~+70 | |
Storage temperature | ℃ | -40~+85 | |
Dimension | mm | Φ5.5×L35 |
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower. The default connector key is aligned to slow axis. Powers transmit through the connector less than 2W.
*For >10W high power applications, we will use heat sink package, contact DK Photonics for details.
* If there is pulse application, please be sure to inform us of pulse energy and peak power.
Package Dimension
*Due to ongoing design improvements, the package size is subject to change. Please contact DK Photonics for confirmation.
Order information P/N: ILP-①-②-③-④-⑤-⑥
When you inquire, please provide the correct P/N number according to our ordering information, and attach the appropriate description would be better. If need any connector, we do not recommend choosing a 250μm bare fiber pigtail.
① | ② | ③ | ④ | ⑤ | ⑥ |
wavelength | Power Handling | Fiber Type | Pigtails Diameter | Fiber Length | Connector |
64:1064nm
30:1030nm 98:980nm XX: Others |
L:<0.5W 1:1W 3:3W 5:5W | 1:PM -PM
2:SM- PM 3:SM-SM |
25:250μm bare fiber
90:900μm Loose Fiber XX: Others |
08:0.8m
10:1.0m XX: Others |
00:None
FP: FC/PC FA: FC/APC XX: Others |
Part Number Example: ILP-30-1-1-90-10-FA
Description: 1030nm In-line Polarizer, 0.5W Power, PM fiber to PM fiber, with 0.9mm OD loose tube, 1.0m length fiber and FC/APC connectors at all ports.
Ordering Information for Custom Parts
If you need to customize other specifications, please provide detailed description for your requirement.
Download
Request a quote
Please provide the following information so that we may process your quote quickly, Please let us know more about your inquiry. If you do not give us any information, we will think that you are not serious, and you might not get a reply from us.